RS D T JK and JK MASTER SLAVE FLIP FLOP TRAINER

Get a Price/Quote

Product Details:

Voltage DC 5V or 12V (typical for digital trainers)
Power External Power Supply Required
Display LED indicators for flip flop output state
Usage Educational laboratory training for Digital Electronics
Product Type Flip Flop Experimental Trainer Kit
Material ABS Plastic Body, PCB with electronic components
Design Modular, open PCB exposure with silkscreen labels
Click to view more
Share Your Product:

Request To Call Back Send Inquiry

RS D T JK and JK MASTER SLAVE FLIP FLOP TRAINER Price And Quantity

Minimum Order Quantity 1 Unit

Supported Flip Flops RS, D, T, JK, and JK Master Slave
Included Components ICs, resistors, capacitors, connecting leads
IC Compatibility Compatible with both TTL and CMOS ICs
Output Monitoring LED indicators and test points
Instructions Supplied with user manual and experiment booklet
Color Light blue/white enclosure with labelled interface panels
Construction Ready to use, pre-assembled and tested
Logic Inputs Toggle switches for logic 0/1
Termination 4mm banana socket terminals
Safety Features Over-voltage and short-circuit protection
Input Switches Push-to-on switches for providing clock and preset/clear inputs

RS D T JK and JK MASTER SLAVE FLIP FLOP TRAINER Product Specifications

Product Type Flip Flop Experimental Trainer Kit
Weight Approx. 1.5 kg
Usage Educational laboratory training for Digital Electronics
Power Source AC mains with adapter (to DC), or 9V battery via on-board regulator
Voltage DC 5V or 12V (typical for digital trainers)
Illuminant LEDs
Detector No inbuilt detector; trainer for experimenting with flip flop circuits
Dimension (L*W*H) Approx. 340 mm 210 mm 75 mm
Material ABS Plastic Body, PCB with electronic components
Power External Power Supply Required
Design Modular, open PCB exposure with silkscreen labels
Display LED indicators for flip flop output state
Accuracy High logic reliability, accuracy depends on IC specification (typically TTL/CMOS based)

Supported Flip Flops RS, D, T, JK, and JK Master Slave
Included Components ICs, resistors, capacitors, connecting leads
IC Compatibility Compatible with both TTL and CMOS ICs
Output Monitoring LED indicators and test points
Instructions Supplied with user manual and experiment booklet
Color Light blue/white enclosure with labelled interface panels
Construction Ready to use, pre-assembled and tested
Logic Inputs Toggle switches for logic 0/1
Termination 4mm banana socket terminals
Safety Features Over-voltage and short-circuit protection
Input Switches Push-to-on switches for providing clock and preset/clear inputs

RS D T JK and JK MASTER SLAVE FLIP FLOP TRAINER Trade Information

Supply Ability 5 Unit Per Week
Delivery Time 4-5 Days
Main Export Market(s) Australia, North America, South America, Eastern Europe, Western Europe, Africa, Central America, Asia
Main Domestic Market All India

Product Description

RS,D,T, JK & JK MASTER SLAVE FLIP FLOP TRAINER

Objective : To Study & Verify Truth Tables of RS, Master Slave J K Flip Flops using NAND Gates & D, T & JK flip flops using TTL ICs.

Features : Instrument comprises of DC Regulated Power Supply 5VDC/150mA, 4 logic inputs, logic 1 & logic 0 selectable using SPDT switches, 1Hz monoshot clock pulse, two output indicators, Circuit diagram for RS, D, T & JK & JK Master slave flipflops are printed, their respective ICs placed inside the cabinet & connections brought out on the sockets.

Multi-Flip Flop Support

This trainer enables students to experiment with five types of digital flip flops, including RS, D, T, JK, and JK Master Slave configurations. Each section is clearly labelled and allows swift setup for varied digital logic investigations.

Real-Time Visual Output Monitoring

LED indicators provide immediate feedback regarding the state of each flip flop, making it easy to observe and record logic transitions during experimentation. Test points allow direct measurement for advanced analysis.

Robust Construction and Safety

Encased in a durable light blue/white ABS enclosure, the trainer offers excellent circuit protection and safe handling. Over-voltage and short-circuit safeguards create a reliable testing environment for educational labs.

FAQs of RS D T JK and JK MASTER SLAVE FLIP FLOP TRAINER:

Q: How do I use the RS D T JK and JK Master Slave Flip Flop Trainer for an experiment?

A: To begin an experiment, connect your external DC power supply (5V or 12V) or use the AC mains with the onboard regulator. Select your desired flip flop using labelled toggle switches for input logic, set clock and preset/clear inputs with push-to-on switches, then observe output states via the LED indicators.

Q: What flip flops can be included in the trainers experiments?

A: You can conduct experiments with RS, D, T, JK, and JK Master Slave flip flops, as supported by the trainers circuitry and interface. The modular design enables seamless switching between flip flop types.

Q: When should I consult the experiment booklet or user manual?

A: Reference the supplied user manual and experiment booklet whenever setting up circuits, calibrating the trainer, or troubleshooting. These resources provide step-by-step procedures, wiring diagrams, and essential theory to ensure accurate experiments.

Q: Where is this trainer commonly used?

A: The flip flop trainer is ideal for digital electronics education in schools, colleges, and technical laboratories, primarily across India. Its labelled interface and visual monitoring are designed for both classroom and hands-on lab training.

Q: What safety features protect the trainer and user during operation?

A: The device incorporates over-voltage and short-circuit protection, safeguarding both the circuit components and the user against electrical faults during experimental usage.

Q: How does the LED output monitoring benefit my learning experience?

A: LED indicators display the instantaneous logic states of flip flop outputs, allowing you to visually track each transition and validate your experiments outcome, enhancing comprehension of digital principles.

Q: Is the trainer compatible with different IC logic families, and can I directly connect test equipment?

A: Yes, the trainer supports both TTL and CMOS ICs. You can use 4mm banana socket terminals and accessible test points to connect external meters and oscilloscopes for deeper analysis.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Digital Lab Training Modules' category

Adder and Subtractor using NAND Gates Minimum Order Quantity : 1 Product Type : Digital logic circuit model Adder/Subtractor trainer. Material : Epoxy PCB, plastic, standard electronic components (ICs, resistors, LEDs). Usage : Educational demonstration and digital logic training in arithmetic circuit design. Weight : Approximate 200 grams (including components and base). Power Source : External DC supply or laboratory power pack (5V). Design : Breadboard/PCB with clear NAND gate based circuit traces for adder/subtractor operation. Power : Low power, suitable for logic level (TTL/CMOS); typically <500 mW. Voltage : Operates on standard digital logic supply (typically 5V DC). Dimension (L*W*H) : Prototype PCB, approximate 10 cm x 8 cm x 3 cm. Display : LED indicators for output bits (sum/difference, carry/borrow). Accuracy : Digital, high logic precision; Output matches expected Boolean results for given binary inputs. Illuminant : LEDs used as visual indicators for circuit output. Charging Time : Not required; operates instantly as per digital circuit logic propagation delay. Detector : Not applicable; Functionally realized with discrete NAND gate logic.

Send Inquiry

Demorgan Theorem kit Minimum Order Quantity : 1 Product Type : Educational Training Kit Material : ABS Plastic body and front panel printed circuit board Usage : Demonstration of DeMorgans Theorem in digital electronics Weight : Approx. 600g Power Source : External AC adaptor Design : Compact benchtop lab trainer Power : 5V DC operation Voltage : 220V AC (Adaptor included) Dimension (L*W*H) : 260 mm x 180 mm x 55 mm Display : Individual Test Points with LED output Accuracy : High precision for digital logic verification Illuminant : LEDbased output display Charging Time : Not applicable (Mains powered) Detector : LED indicators for output display

Send Inquiry

CMOS IC Characteristics Apparatus Minimum Order Quantity : 1 Product Type : Educational Laboratory Testing Equipment Material : Heavy Duty Mild Steel with Powder Coating Usage : Characterization and study of CMOS IC parameters Weight : Approx. 2.2 kg Power Source : Mains Powered (AC) Design : Compact and Durable Modular Design Power : Low Power Consumption (approx. 2 W) Voltage : Operating Voltage 230V 10%, 50Hz AC Dimension (L*W*H) : 330 mm x 220 mm x 75 mm Display : Digital LED Display Accuracy : High measurement accuracy suitable for laboratory applications Charging Time : Instantaneous (not applicable as no battery charging required) Detector : Solidstate circuitry for CMOS IC analysis

Send Inquiry

Study of Left , Right & Programmable Shift Register Minimum Order Quantity : 1 Product Type : Digital Electronics Training Equipment Material : ABS plastic enclosure, highgrade PBC Usage : Educational laboratory experiments for sequential logic Weight : Approx. 1.2 kg Power Source : External adapter/DC supply Design : Tabletop, modular with test points Power : 5V DC Voltage : 5V DC input Dimension (L*W*H) : 340 x 210 x 100 mm Display : LED indication for outputs Accuracy : High accuracy in digital bit shifting operations Illuminant : LED lamp indicators

Send Inquiry

SEND INQUIRY CALL ME FREE