RC,Low Pass,High Pass,Band Pass & Band Stop Filter

Get a Price/Quote

Product Details:

Power Passive device, no external power required
Voltage Input test voltages up to 15V
Usage Electronic signal processing, academic laboratory experiments
Product Type Passive RC Filter (Low Pass, High Pass, Band Pass, Band Stop)
Material FR4 PCB, Resistors, Capacitors, Connectors
Design Modular PCB with test points and circuit markings
Power Source N/A (Passive)
Click to view more
Share Your Product:

Request To Call Back Send Inquiry

RC,Low Pass,High Pass,Band Pass & Band Stop Filter Price And Quantity

Minimum Order Quantity 1 Unit

Component Tolerance Resistors 1%, Capacitors 5%
Input Impedance Typically >10 k
Connector Type Banana sockets or screw terminals
Test Points Multiple input/output test points for measurement
Cut-off Frequency Variable, set by selected R and C (f_c = 1/(2RC))
Number of Filters 4 (Low Pass, High Pass, Band Pass, Band Stop)
Frequency Range 10 Hz to 100 kHz (selectable by RC component values)
Compliance RoHS compliant design
Storage Temperature -20C to 75C
Output Impedance Typically <1 k
Operating Temperature 0C to 55C
Color Green solder mask PCB
Filter Order 1st order (standard); customizable on request
PCB Thickness 1.6 mm
Mounting Type Bench-top/Lab use

RC,Low Pass,High Pass,Band Pass & Band Stop Filter Product Specifications

Dimension (L*W*H) As per design; typically lab PCB: 100mm x 60mm x 20mm
Weight Approx. 150g
Product Type Passive RC Filter (Low Pass, High Pass, Band Pass, Band Stop)
Power Source N/A (Passive)
Usage Electronic signal processing, academic laboratory experiments
Design Modular PCB with test points and circuit markings
Charging Time Depends on RC time constant ( = RC)
Accuracy 2% (for standard RC filter circuits)
Voltage Input test voltages up to 15V
Power Passive device, no external power required
Material FR4 PCB, Resistors, Capacitors, Connectors

Component Tolerance Resistors 1%, Capacitors 5%
Input Impedance Typically >10 k
Connector Type Banana sockets or screw terminals
Test Points Multiple input/output test points for measurement
Cut-off Frequency Variable, set by selected R and C (f_c = 1/(2RC))
Number of Filters 4 (Low Pass, High Pass, Band Pass, Band Stop)
Frequency Range 10 Hz to 100 kHz (selectable by RC component values)
Compliance RoHS compliant design
Storage Temperature -20C to 75C
Output Impedance Typically <1 k
Operating Temperature 0C to 55C
Color Green solder mask PCB
Filter Order 1st order (standard); customizable on request
PCB Thickness 1.6 mm
Mounting Type Bench-top/Lab use

RC,Low Pass,High Pass,Band Pass & Band Stop Filter Trade Information

Supply Ability 5 Unit Per Week
Delivery Time 4-5 Days

Product Description

RC, Low Pass, High Pass, Band Pass & Band Stop Filters

Objective : To study the Pass Band & Stop Band of Designed filter.

Features : Circuit diagram for all the filters are printed on the front panel and components are mounted behind the front panel. Different types of resistances & capacitors are provided on the front panel. Sockets are mounted on the front panel to connect the Function Generator across input signal & CRO across output.

Precise, Customizable Filtering for Labs and Industry

Provide your academic or research lab with a modular RC filter board supporting all major analog filter types. Easily adjust cut-off frequencies by replacing precise RC values. High component accuracy and multiple test points ensure detailed analysis and reliable performance, making it ideal for education and prototyping.

User-Friendly and Passive by Design

No external power is neededthis filter module operates passively across a wide voltage input (up to 15V). The compact bench-top design uses durable FR4 PCB material and is equipped with banana sockets or screw terminals for fast, reliable connections, ensuring seamless integration in instructional or experimental settings.

FAQs of RC,Low Pass,High Pass,Band Pass & Band Stop Filter:

Q: How do I change the cut-off frequency on this RC filter module?

A: You can adjust the cut-off frequency by selecting and replacing the appropriate resistor (R) and capacitor (C) values using the formula f_c = 1/(2RC). The modular PCB and clearly marked test points make the process straightforward.

Q: What filter types are included in this product, and how is each used?

A: The module includes Low Pass, High Pass, Band Pass, and Band Stop filters. Low Pass allows frequencies below the cut-off; High Pass allows those above; Band Pass lets a specific range through; and Band Stop attenuates a particular band. Usage is selectable through the designated circuit sections.

Q: When should I use this RC filter board in my experiments?

A: This filter board is ideal for academic lab experiments, electronic signal processing, prototyping, or whenever frequency selection or noise filtering is required between 10 Hz and 100 kHz.

Q: Where can this module be installed and used?

A: Designed for bench-top and laboratory use, the module features a sturdy PCB and comes with banana sockets or screw terminals for secure connections, allowing flexible setup in academic or R&D environments.

Q: What are the advantages of the test points and modular PCB design?

A: Multiple input/output test points enable you to measure and observe filter behavior from different stages, while the modular PCB allows quick configuration changes, circuit tracing, and educational clarity.

Q: How accurate are the filtering and how tolerant are the components?

A: The filter provides 2% accuracy in standard configurations. It uses precision resistors (1% tolerance) and capacitors (5% tolerance), ensuring stable, reproducible results in your applications.

Q: What are the benefits of a passive filter module compared to active filters?

A: Being passive, the module requires no external power source, offers inherent simplicity, and reduces noise introduction, making it reliable for low to moderate signal applications and suitable for instructional use.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Filter Circuits' category

Cascaded Two Port Network Minimum Order Quantity : 1 Product Type : Cascaded Two Port Network Material : Highgrade FR4 PCB with copper traces and quality connectors Usage : For signal transmission, analysis, and filtering in electronics labs and communications Accuracy : High linearity in Sparameter measurement, typically 98%+ Weight : Approx. 150 grams Dimension (L*W*H) : Varies, reference image approx. 100 mm x 50 mm x 30 mm Power : No power consumption (passive device) Voltage : Maximum input voltage typically 50 V (depends on component rating) Design : Modular 2port configuration for cascading Power Source : Not required (passive) Detector : No active detector; network is passive Charging Time : N/A (passive component)

Send Inquiry

M Derived T Type Passive Low Pass High Pass Filter Minimum Order Quantity : 1 Product Type : M Derived T Type Passive Low Pass High Pass Filter Material : High grade ferrite core, copper wire, PCB, and passive components Usage : For signal filtering in electronic and communication circuits Accuracy : High attenuation with precise cutoff frequency Weight : Depends on configuration and component values, typically lightweight Dimension (L*W*H) : Customized as per application, typical sizes available Power : No external power required (Passive operation) Voltage : Handles standard signal voltage levels up to rated specification Design : MDerived TType configuration Power Source : Passive, does not require power source Detector : Not applicable (Passive filter) Charging Time : Not required (Passive device)

Send Inquiry

Pi Type Passive Low&High Pass,Band Pass&Stop Minimum Order Quantity : 1 Product Type : Pi Type Passive Low Pass, High Pass, Band Pass, Band Stop Filter Material : High Quality Ceramic, Metal Film, or as specified Usage : Frequency Filtering, Electronic Circuits, Signal Processing, Communication Equipment Accuracy : High Precision Filtering Weight : Depends on dimensions and materials Dimension (L*W*H) : As per customer request or standard sizes Power : Passive, No External Power Required Voltage : Up to Rated Circuit Values Design : Pi Type Network (CapacitorInductorCapacitor in Pi Configuration)

Send Inquiry

SEND INQUIRY CALL ME FREE