Colpitts Oscillator

Get a Price/Quote

Product Details:

Power 2 W
Display No integrated display; should be monitored via oscilloscope
Voltage 9 V DC
Usage Used for signal generation, testing, and electronics experiments
Product Type Oscillator circuit module
Material FR4 PCB, electronic components (capacitors, inductors, transistors)
Design Colpitts oscillator topology with discrete components
Click to view more
Share Your Product:

Request To Call Back Send Inquiry

Colpitts Oscillator Price And Quantity

Minimum Order Quantity 1 Unit

Frequency Adjustment Method Variable capacitance (trimmer or rotary capacitor)
Signal Output Terminal BNC connector
Application Area Educational, laboratory, communication design
Temperature Stability 0.1% over typical operating range
Output Amplitude 0.2 V to 2 V peak-to-peak
Maintenance No periodic maintenance required; replace defective passive components if needed
Operating Frequency Range 100 kHz to 10 MHz (Center frequency tunable by capacitor/inductor values)
Storage Temperature -20C to 85C
Safety Compliance RoHS compliant
Operating Temperature 0C to 50C
Load Impedance 600 recommended
Output Waveform Sinusoidal
PCB Mount Type Through-hole
Number of Output Channels Single channel
Transistor Type NPN bipolar junction transistor (e.g., BC547)

Colpitts Oscillator Product Specifications

Accuracy High frequency stability, typically within 0.5% of center frequency
Power Source External DC supply
Dimension (L*W*H) 75 mm x 50 mm x 20 mm
Voltage 9 V DC
Display No integrated display; should be monitored via oscilloscope
Weight 80 grams
Material FR4 PCB, electronic components (capacitors, inductors, transistors)
Design Colpitts oscillator topology with discrete components
Power 2 W
Detector Not applicable; acts as a waveform generator
Product Type Oscillator circuit module
Usage Used for signal generation, testing, and electronics experiments

Frequency Adjustment Method Variable capacitance (trimmer or rotary capacitor)
Signal Output Terminal BNC connector
Application Area Educational, laboratory, communication design
Temperature Stability 0.1% over typical operating range
Output Amplitude 0.2 V to 2 V peak-to-peak
Maintenance No periodic maintenance required; replace defective passive components if needed
Operating Frequency Range 100 kHz to 10 MHz (Center frequency tunable by capacitor/inductor values)
Storage Temperature -20C to 85C
Safety Compliance RoHS compliant
Operating Temperature 0C to 50C
Load Impedance 600 recommended
Output Waveform Sinusoidal
PCB Mount Type Through-hole
Number of Output Channels Single channel
Transistor Type NPN bipolar junction transistor (e.g., BC547)

Colpitts Oscillator Trade Information

Supply Ability 5 Unit Per Week
Delivery Time 4-5 Days
Main Export Market(s) Australia, North America, South America, Eastern Europe, Western Europe, Middle East, Africa, Central America, Asia
Main Domestic Market All India

Product Description

Colpitts Oscillator (AE 332)

Objective : To study the Frequency and Wave shape generated by a Colpitt Oscillator.

Features : Instrument comprises of 12 V DC Regulated Power Supply, Circuit diagram printed & components mounted on front panel.

Precision Frequency Control

This Colpitts Oscillator provides users with exceptional control over their output frequency, adjustable from 100 kHz to 10 MHz. The frequency tuning is accomplished through a variable capacitance mechanism, allowing for refined adjustments to suit a range of experimental or testing scenarios.

Robust Design and Mounting

Featuring a sturdy through-hole FR4 PCB and discrete components, the oscillator ensures longevity and ease of maintenance. With its compact profile (75 mm x 50 mm x 20 mm) and BNC output, it is straightforward to incorporate into laboratory and educational environments.

Application Versatility

Engineered for diverse applications, this oscillator is ideal for signal generation, circuit testing, and electronic experiments. Its stable, low-distortion sinusoidal waveform output makes it a valuable tool for communication design and academic laboratories.

FAQs of Colpitts Oscillator:

Q: How is the output frequency of the Colpitts Oscillator adjusted?

A: The operating frequency can be precisely tuned between 100 kHz and 10 MHz by varying the capacitance using a trimmer or rotary capacitor. Adjustments can be made based on the desired frequency for your specific application or test.

Q: What environments and applications is this oscillator suited for?

A: This oscillator is designed for use in educational, laboratory, and communication system settings. It is ideal for signal generation, testing electronics circuits, and in experimental setups where a high-stability sinusoidal waveform is required.

Q: When should maintenance be performed on the Colpitts Oscillator?

A: No periodic maintenance is necessary. Maintenance is only required if a component, such as a capacitor or inductor, becomes defectivereplacement restores full function.

Q: Where should the oscillator output be monitored?

A: Since the unit does not feature an integrated display, the output waveform should be observed via an oscilloscope connected to the standard BNC connector for accurate amplitude and frequency readings.

Q: What is the recommended load impedance for optimal performance?

A: The oscillator is calibrated for a 600 load impedance, ensuring the best signal quality and amplitude consistency in most standard laboratory and educational setups.

Q: How does this oscillator benefit laboratory or communication design work?

A: With its high frequency stability (0.5%), low-distortion output, and capacitive tuning, the device provides a reliable signal source, enhancing accuracy and repeatability of tests in research, design, and learning environments.

Q: What process should be followed in the event of a fault or signal irregularity?

A: If performance issues arise, the user should disconnect power and inspect passive components (capacitors, inductors) for faults. Replace any defective parts before resuming operation to maintain optimal performance.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Oscillators Experiments' category

Relaxation Oscillator using UJT Minimum Order Quantity : 1 Product Type : Electronic oscillator circuit/module Usage : Used for waveform generation, clock pulse generation, as a timing circuit Design : Compact PCB mounted components, standard electronics lab construction Voltage : 9V to 15V DC supply recommended Display : N/A; output observed on CRO/oscilloscope Weight : Approximately 50g Material : Glass epoxy PCB, electronic components (resistors, capacitors, UJT, etc.) Power : Operates at low power consumption Power Source : External DC battery or regulated power supply Accuracy : High frequency stability, repeatable output waveform Dimension (L*W*H) : Approx. 100mm x 70mm x 25mm (depending on board layout) Detector : N/A (Nonapplicable; circuit for waveform generation not detection) Charging Time : Controlled by RC time constant; adjustable by resistor/capacitor values

Send Inquiry

Phase Shift Oscillator Minimum Order Quantity : 1 Product Type : Phase Shift Oscillator Trainer Kit Usage : Laboratory experiments, educational demonstrations, frequency generation Design : Compact, portable plastic enclosure with test points Voltage : 9V to 12V DC (typical) Display : No digital display; waveform output monitored via oscilloscope Weight : Approx. 250 grams Material : Highquality PCB, standard electronic components Power : Low power consumption, suitable for DC operation Power Source : Battery or external DC power supply Accuracy : High frequency stability, typically 5% of calculated frequency Dimension (L*W*H) : Approx. 120 mm x 80 mm x 40 mm Detector : Not applicable (oscillator circuit) Charging Time : Not specified (continuous operation device)

Send Inquiry

Hartley Oscillator Minimum Order Quantity : 1 Product Type : Electronic Oscillator Circuit Usage : Used for generating sine wave signals in RF (radio frequency) applications, frequency generation, and testing Design : Standard Hartley configuration with tapped inductor or two inductors in series, capacitive feedback Voltage : Operating voltage: 5V to 15V DC, based on design Display : No display; output available at designated terminals Weight : Approximately 50100 grams depending on construction Material : PCB, electronic components (resistors, capacitors, inductors, transistor or opamp) Power : Typically powered by external DC supply (e.g. 5V, 9V, 12V options) Power Source : External DC power supply Accuracy : High frequency stability, typically 0.1% or better depending on quality of components Dimension (L*W*H) : Dependent on design, commonly PCB mounted format (e.g. 100mm x 60mm x 20mm) Detector : Not applicable; Hartley Oscillator is a signal generating circuit Charging Time : Not applicable; operates continuously when powered

Send Inquiry

Wein Bridge Oscillator using Operational Amplifier Minimum Order Quantity : 1 Product Type : Electronic Oscillator Training Kit Usage : Demonstration and study of sine wave generation in laboratories Design : Breadboard or PCB mounted compact design, open component layout Voltage : +12V to +15V DC supply required Display : No inbuilt display; output can be monitored using an external oscilloscope Weight : Approx. 800 grams Material : Glass epoxy PCB with mounted electronic components Power : 5W maximum Power Source : External DC Power Supply Accuracy : High frequency stability, typically <2% deviation Dimension (L*W*H) : 300 mm x 150 mm x 60 mm (approximate) Detector : Not applicable (Oscillator circuit)

Send Inquiry

SEND INQUIRY CALL ME FREE